You can use the Reset button on the IBM 2212 system card to reset the operational software; however, you must press it and hold it for at least 6 seconds. If you press it and hold it for less than 6 seconds, the memory contents will be dumped if dumping has been enabled via talk 6 in the command-line interface. (See Enabling Dumping for more information.) It will also reboot the IBM 2212 if reboot has been enabled via talk 6 in the command-line interface. If reboot has not been enabled, the IBM 2212 will hang until it has been powered off and on. It is recommended that you always enable reboot on the IBM 2212.